Saws

The Irwin Universal 880 Triple Ground Hardpoint Saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws.

The blade is treated with a water based laquer providing four times the added protection than conventional anti-rust agents.

The handle is a proven design, light and strong with an ultra sonic welded soft-grip for increased hold and enhanced comfort.

90 and 45 degree angles integrated in the handle aid the user when marking out.

The Evo saw is a revolutionary and unique saw that has been developed through extensive user research and ergonomic principles.

The unique, patented design ensures that you get a quicker, more efficient cut as you use the whole length of the blade.

It has triple ground, hardpoint teeth (10 tpi) for optimum speed and quality of cut.

The handle has a soft grip and is set to enable flush cutting.

The top of the blade allows for 45 and 90° marking of the workpiece.

It cuts wood, block board, plywood, chipboard and MDF with ease.

• High quality C75 steel blade: ensures maximum stability and power transfer.
• 0.85 mm lacquered blade: gives 4 x better rust protection than traditional lacquer.
• Finger rest for maximum control.
• Comfort-grip: light and strong ultrasonic welded soft-grip handle for maximum grip and comfort.
• Optimised tooth design and set: provides maximum versatility, speed of cut and quality of cut.
• High angled nose: increases blade stability.
• Hardened teeth: hard point teeth stay sharp 6-8 times longer than non-hardened teeth.
• Universal usage: optimised product design for universal usage and highest versatility.
• Flush cutting: to cut off at surface level.
• Maximum blade usage: allows up to 100% blade usage.

The Bahco PC-22-INS is a 22 inch/550 mm handsaw with new waved toothing.
The WT-toothing is especially designed for cutting insulation material with the blade being re-sharpenable with any regular knife sharpener. The blade has a thickness of 0.83mm which is equal to other common saws. The PC-22INS has a comfortable two component handle and a unique rust-protective sleeve. The blade is not treated with clear varnish (as in Bahco's regular handsaws) nor with powder coating as both influence the performance of the saw due to friction and bluntness of the saw. The sleeve is impregnated with a Volatile Corrosion Inhibitor* (VCI) that will protect the saw from corrosion.

The ProfCut Insulation handsaw has been tested on all sorts of insulation materials and gives excellent finishing with low friction and creates less saw dust.

The most common international materials for insulation are:
Mineral wool or Glass wool.
EPS: Expanded Polystyrene.
XPS: Extruded polystyrene.
Stone wool or Rock wool.

Hardpoint fleam toothed crosscut handsaw with soft grip for user comfort.

The ideal jobbing builders saw.

Length:  22in
Teeth:    7 per inch
Point:     8 per inch

Hardpoint handsaw with soft grip for user comfort.

The fine toothing gives a superior finish.

Ideal for cutting plywood, chipboard and other man-made materials.

Length:  22in
Teeth:    9 per inch 
Point:    10 per inch

7/8 teeth per inch hardpoint
Size: 22in

The XT range has a thicker blade than conventional handsaws.

Length:    22in.
Toothing:  XT Universal
Point:       10 per inch

Hardpoint

Length:    22in
Toothing:  XT Universal.
Point:       8 per inch

Hardpoint

Length:    24in
Toothing:  XT Universal
Point:       8 per inch

Hardpoint

Hardpoint tenon saw with soft grip handle for user comfort

A truly unique and professional Hacksaw Frame.

Ergonomically designed with very high blade tension for straight, accurate and exact kerfs.

Centred blade for correct balance and spring tensioned blade loading mechanism for quick blade changes.

Alternative 55° blade mounting for flush cutting.

Supplied with the reliable and shatterproof sandflex Bi-metal black 24 TPI, hacksaw blade with excellent cutting performance.

Length: 300mm
Weight: 720 Grammes

Hardpoint tenon saw with soft grip handle for user comfort

The NEW Xpert range of handsaws from IRWIN have evolved into super-efficient cutting tools that have University verified technology at their heart.

This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both push and pull strokes - so you don’t have to work so hard.

Lightweight two component frame with steel core.

Well balanced for straight cutting with maximum effect.

No protruding parts for maximum accessibility.

Compact design for ease of use.

Tensioning mechanism integrated in handle.

Comfortable non slip handle with front grip ensures positive handling and control.

Alternative 50 deg pin mount to allow flush cutting.

Size: 12in

SANDFLEX® BI-METAL, 3906

The SANDFLEX® blade combines extreme cutting performance and wear resistance with a high degree of flexibility and is vastly superior to all-hard high speed blades or conventional, flexible blades.

SANDFLEX® BI-METAL, 3906

The SANDFLEX® blade combines extreme cutting performance and wear resistance with a high degree of flexibility and is vastly superior to all-hard high speed blades or conventional, flexible blades.

SANDFLEX® BI-METAL, 3906

The SANDFLEX® blade combines extreme cutting performance and wear resistance with a high degree of flexibility and is vastly superior to all-hard high speed blades or conventional, flexible blades.

The ergonomically shaped handle ensures a comfortable grip and the 90º and 180º blade setting options are a handy facility.

The I125 is able to to reach over 125kg blade tension to ensure accurate cutting.

Blade Length: 300mm / 12in

A wire framed Junior Hacksaw with an orange lacquered finish.

Fitted with a 32 T.P.I. Blade for metal cutting.

Blade length: 250mm

355mm / 12" FatMax Floorboard Saw 13 teeth per inch

• Teeth on curved end of blade

helps to start off a cut in floorboards

• 13 teeth per inch

• Induction hardened teeth

lasting twice as long as previous product

• Bi-material handle screwed and ultrasonically welded

for comfort and security

• 45° and 90° angle

quick reference for cuts

• Finger rest

ergonomic design, useful for extra control when starting out

355mm / 12" Tenon / Back Saw 11 Teeth per inch

• 11 and 13 teeth per inch

for a fine finish

• Reinforced back

for extra ridgety, makes a straigher cut

• Induction hardened

teeth stay sharper twice as long than previous model

• Finger rest

ergonomic design, useful for extra control when starting a cut

• 3 sided precision ground teeth

offer razor sharp cutting edges at every stage of the stroke

• Bi-material handle screwed and ultrasonically welded

for comfort and security

• Handle with marked 45° and 90° angles

360mm / 14" Tenon / Saw 11 Teeth per inch

• 11 and 13 teeth per inch

for a fine finish

• Reinforced back

for extra ridgety, makes a straigher cut

• Induction hardened

teeth stay sharper twice as long than previous model

• Finger rest

ergonomic design, useful for extra control when starting a cut

• 3 sided precision ground teeth

offer razor sharp cutting edges at every stage of the stroke

• Bi-material handle screwed and ultrasonically welded

for comfort and security

• Handle with marked 45° and 90° angles

300mm / 12" PVC Saw 11 teeth per inch

• 11 teeth per inch

• Un-set teeth

creates less burrs when cutting

• Pull saw teeth

easier to start off control

• 1mm blade thicknedd

for increased accuracy of cut

• Induction hardened teeth

for long lasting cutting life

• Bi-material handle screwed and ultrasonically welded

for comfort and security

• Finger rest

ergonomic design, useful for extra control when starting a cut

• 30° / 90° marking

feature at the end of blade

500mm / 20" FatMax Heavy Duty Saw 7 teeth per inch

• Bi-material handle screwed and ultrasonically welded

for comfort and security

• Teeth are precision set

top generate clearance of kerf for the blade to cut on both forward and back stroke increasing cutting efficiency by 30%

• 3 sided precision ground teeth

offer razor sharp cutting edges at every stage of the stroke

Induction hardened

teeth stay sharper twice as long as previous model

500mm / 20" FatMax Heavy Duty Saw 7 teeth per inch

• Bi-material handle screwed and ultrasonically welded

for comfort and security

• Teeth are precision set

top generate clearance of kerf for the blade to cut on both forward and back stroke increasing cutting efficiency by 30%

• 3 sided precision ground teeth

offer razor sharp cutting edges at every stage of the stroke

Induction hardened

teeth stay sharper twice as long as previous model

500mm / 20" FatMax Heavy Duty Saw 7 teeth per inch

• Bi-material handle screwed and ultrasonically welded

for comfort and security

• Teeth are precision set

top generate clearance of kerf for the blade to cut on both forward and back stroke increasing cutting efficiency by 30%

• 3 sided precision ground teeth

offer razor sharp cutting edges at every stage of the stroke

Induction hardened

teeth stay sharper twice as long as previous model

335mm FatMax Jab Saw plus Scabbard 7 teeth per inch

• 7 teeth per inch

• Ideal for punching

through plasterboard

• Anti-slip ergonomic bimaterial handle

for optimum user comfort

• Triple bevelled toothing

for 50% quicker cutting

• Sharp point for piercing board

3 in 1 Saw

• Multi-Purpose 3-in-1 Saw Set offers end users the functionality of 3 different blades in one space saving design

- universal pull saw blade, metal saw blade and compass saw blade

• Anti-slip ergonomic bi-material handle

for optimum user comfort

• The turn knob allows blades to be easily changed

and they can be tilted into 6 different positions

• The main blade utilises a pull saw tooth configuration

which is less likely to jam or bend while in use

• 250mm / 10" aggressive tooth 11 teeth per inch universal wood saw blade cuts on "pull" stroke

- perfect for general woodwork and pruning

• 200mm / 8" compass saw blade 9 teeth per inch

for more detailed work

• 150mm / 6" metal hacksaw blade 24 teeth per inch

for cutting metal ppipes and rods

10" FatMax reversible Flush Cut Saw

• 13 teeth per inch

• Spring-loaded pin

allows blade to be reversed to cut from left to right

• Steel back prevents bending

for strong, true, straight cuts

• Wide blade

for precise cutting such as dovetails, small joints and cut-offs

• Reversible handle

provides improved access in close quarters

• New soft grip handle

for comfort and support

FatMax Multi Saw with 6" Metal and 5" Wood Blades

• 24 teeth per inch x 10" flexible metal hacksaw blade

• 11 teeth per inch x 5" woodsaw blade

• Double tension nut

allows quick and easy blade change

• Saw blade coating

reduces blinding making sawing easier

•Designed for precise cutting in confined spaces

- such as dovetails, smalle joints and cut-offs

• New soft grip handle

for comfort and support

4 3/4" FatMax Coping Saw Throat Death

• Hardened tempered blade

for long life

• Steel back

prevents bending for strong, true, straight cuts

• New soft grip handle

for comfort and support

5" FatMax Mini FlushCut Pull Saw

• 23 teeth per inch

- cuts quickly and cleanly on the pull stroke

• Double sided blade

for convenient cutting from the left or the right

• Flexible blade

for flush cutting plugs and dowels

• For precise cutting

such as dovetails, small joints and cut-offs

430mm FatMax Hacksaw 24 TPI

Thumb gripfor accuracy

• Durable die cast aluminium body

both lightweight and strong

• Supplied with bi-metal blade

(24 TPI)

• 90° blade location and 45° flush cut

• Bi-material soft grip

for comfort

• Adjustable thumb dial tension mechanism

inside handle

• Spring loaded blade tension device

gives 150kg blade tension for ease of use

• 150kg tension

300mm Heavy Duty Hacksaw 24 TPI

• Bi-material ergonomic frame and handle

for superior comfort and grip

• Patented quick blade change and lever

to change tension suitable for application

• 80kg permanent blade tension

- faster cutting

• 2 blade positions: 90° and 45°

• Easy tension memorisation and adjustment

using a tightening wheel

500mm / 20" FatMax Heavy Duty Saw 7 teeth per inch

• Bi-material handle screwed and ultrasonically welded

for comfort and security

• Teeth are precision set

top generate clearance of kerf for the blade to cut on both forward and back stroke increasing cutting efficiency by 30%

• 3 sided precision ground teeth

offer razor sharp cutting edges at every stage of the stroke

Induction hardened

teeth stay sharper twice as long as previous model

Specially designed large teeth for cutting cellular concrete.

1mm thick high quality steel blade ensures maximum stability and power transfer.

Xpert soft grip handle provides a positive, lightweight but durable grip, even during prolonged use.

Razor sharp, double ground TCT teeth that cut in both the push and pull stroke for faster cutting with less effort.

45º and 90º angles on the handle, useful for marking.

Length:  700mm - 28in

Sharpened tip for easy punching through drywall.

Pro-touch soft grip handle for durability and comfort.

650mm / 26" FatMax Concrete Saw 1.4 teeth per inch

• 1.4 teeth per inch

• Specially designed 26" blade

ideal for cutting cellular blocks and soft stone

• Induction hardened

teeth stay sharper twice as long than previous model

• Bi-material screwed and ultrasonically welded

for comfort and security

• Handle with marked 45° and 90° angles

550mm / 22" FatMax Plasterboard Saw 7 teeth per inch

• 7 teeth per inch

• Specially designed tooth geometry

ideal for plasterboard, plaster tiles, corrugated partitions

• Bi-material handle screwed and ultrasonically welded

for comfort and security

• 3 sided precision ground teeth

offer razer sharp cutting edges at every stage of the stroke

• Induction hardened

teeth stay sharper twice as long as previous model

• Handle with marked 45° and 90° angles