Trimmers & Profilers
-
Template oversize
26/2 x 1/4"Template oversize
26/2X1/4TC
Oversize profiler allows component to be routed oversize to template.
- Useful when making jigs, templates and patterns.
- Can be used for trenching operations in shallow passes.
Specifications 
D 8 mm C 19 mm B 12.7 mm E 2.35 mm Shank4Diameter 1/4 inch -
Template oversize
26/3 x 1/4"Template oversize
26/3X1/4TC
Oversize profiler allows component to be routed oversize to template.
- Useful when making jigs, templates and patterns.
- Can be used for trenching operations in shallow passes.
Specifications D 1/2 inch D 12.7 mm C 19 mm B 19.1 mm E 3.2 mm Shank4Diameter 1/4 inch -
Trimmer and V groove 16 mm diameter 25.4mm length
46/85 x 1/4"Trimmer and V groove 16 mm diameter 25.4mm length
46/85X1/4TC
Two flute.
- For trimming of laminate and solid lipping.
- 1.6mm deep 'V' groove to hide glue line.
Specifications 
D 16 mm D2 12.7 mm C 1 inch C 25.4 mm B 12.7 mm Shank4Diameter 1/4 inch -
Guided trimmer 6.3 mm diameter 12.7mm length
46/05 x 1/4"Guided trimmer 6.3 mm diameter 12.7mm length
46/05X1/4TC
Two flute mini-trim with guide bearing will profile intricate shapes.
- Max. 2.0mm trimming.
Specifications 
D 1/4 inch D 6.3 mm C 1/2 inch C 12.7 mm B 6.3 mm A 90 degrees Shank4Diameter 1/4 inch -
Guided trimmer 6.3 mm diameter 25.4mm length
46/07 x 1/4"Guided trimmer 6.3 mm diameter 25.4mm length
46/07X1/4TC
Two flute mini-trim with guide bearing will profile intricate shapes.
- Max. 2.0mm trimming.
Specifications D 1/4 inch D 6.3 mm C 25.4 mm B Fractionally larger than cutter dia mm A 90 degrees Shank4Diameter 1/4 inch -
Guided trimmer 19.1 mm diameter 50mm length
46/212 x 1/2"Guided trimmer 19.1 mm diameter 50mm length
46/212X1/2TC
Self-guiding trimmers with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay.
- For copy profiling, use the bearing to follow a template or base edge of board.
- An approximate 3mm overlap should be left before copy profiling.
- When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Specifications D 3/4 inch D 19.1 mm C 2 inches C 50 mm OL 116 mm B 19.1 mm Shank4Diameter 1/2 inch -
Guided trimmer 19.1 mm diameter 25mm length
46/20 x 1/2"Guided trimmer 19.1 mm diameter 25mm length
46/20X1/2TC
Self-guiding trimmers with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay.
- For copy profiling, use the bearing to follow a template or base edge of board.
- An approximate 3mm overlap should be left before copy profiling.
- When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
- Downcut to prevent breakout on veneer.
Specifications D 19.1 mm C 25 mm B 19.1 mm A 90 degrees Shank4Diameter 1/2 inch -
Guided trimmer 18.2 mm diameter 14mm length
46/211 x 1/4"Guided trimmer 18.2 mm diameter 14mm length
46/211X1/4TC
Self-guiding trimmers with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay.
- For copy profiling, use the bearing to follow a template or base edge of board.
- An approximate 3mm overlap should be left before copy profiling.
- When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
- Ref. 46/211 has a sleeved bearing to allow for regrinds in case of resharpening.
Specifications D 18.2 mm C 14 mm OL 59 mm B 18.2 mm Shank4Diameter 1/4 inch -
Trimming cutter 12.7 mm diameter
T46/01 x 1/4"Trimming cutter 12.7 mm diameter
T46/01X1/4TC
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.
- Self-guiding trimmer with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay.
- For copy profiling, use the bearing to follow a template or base edge of board.
- A 3mm approximate overlap should be left before copy profiling.
- When using plastic laminate always allow laminate adhesive to dry before trimming.
- This avoids clogging the guide bearing.
Specifications D 1/2 inch D 12.7 mm C 25 mm B 12.7 mm A 90 degrees Shank4Diameter 1/4 inch -
Trimming cutter 12.7 mm diameter
T46/04 x 1/4"Trimming cutter 12.7 mm diameter
T46/04X1/4TC
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.
- Self-guiding trimmer with bearings mounted on end of cutter.
Specifications D 1/2 inch D 12.7 mm C 16 mm OL 59 mm B 12.7 mm Shank4Diameter 1/4 inch -
Trimming cutter 15.9 mm diameter
T46/1 x 1/4"Trimming cutter 15.9 mm diameter
T46/1X1/4TC
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.
- Self-guiding trimmer with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay.
- For copy profiling, use the bearing to follow a template or base edge of board.
- A 3mm approximate overlap should be left before copy profiling.
- When using plastic laminate always allow laminate adhesive to dry before trimming.
- This avoids clogging the guide bearing.
Specifications D 5/8 inch D 15.9 mm C 13 mm B 15.9 mm Shank4Diameter 1/4 inch -
Trimming cutter 18.2 mm diameter
46/22 x 1/2"Trimming cutter 18.2 mm diameter
46/22X1/2TC
Self-guiding trimmers with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay.
- For copy profiling, use the bearing to follow a template or base edge of board.
- An approximate 3mm overlap should be left before copy profiling.
- When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Specifications D 18.2 mm C 50 mm B 18.2 mm A 90 degrees Shank4Diameter 1/2 inch -
Trimming cutter 9.5 mm diameter
T46/02 x 1/4"Trimming cutter 9.5 mm diameter
T46/02X1/4TC
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.
- Self-guiding trimmer with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay.
- For copy profiling, use the bearing to follow a template or base edge of board.
- A 3mm approximate overlap should be left before copy profiling.
- When using plastic laminate always allow laminate adhesive to dry before trimming.
- This avoids clogging the guide bearing.
Specifications D 3/8 inch D 9.5 mm C 25 mm B 9.5 mm A 90 degrees Shank4Diameter 1/4 inch -
Trimming cutter 9.5 mm diameter
T46/0 x 1/4"Trimming cutter 9.5 mm diameter
T46/0X1/4TC
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.
- Self-guiding trimmer with bearings mounted on end of cutter.
Specifications D 3/8 inch D 9.5 mm C 1/2 inch C 12.7 mm B 9.5 mm A 90 degrees Shank4Diameter 1/4 inch -
Double guided trim profile cutter
46/301 x 1/2"Double guided trim profile cutter
46/301X1/2TC
Ball bearings fitted to both nose and shank.
- Allows templates to be placed either on top or the bottom of the material, for ease of routing.
- Allows for irregular grained timber to be profiled more easily, by turning component other way up.
Specifications 
D 3/4 inch D 19.1 mm C 1 31/32 inch C 50 mm OL 114.5 mm B 19.1 mm Shank4Diameter 1/2 inch -
Double guided trim profile cutter
46/300 x 1/2"Double guided trim profile cutter
46/300X1/2TC
Ball bearings fitted to both nose and shank.
- Allows templates to be placed either on top or the bottom of the material, for ease of routing.
- Allows for irregular grained timber to be profiled more easily, by turning component other way up.
Specifications D 3/4 inch D 19.1 mm C 1 inch C 25.4 mm B 19.1 mm Shank4Diameter 1/2 inch -
Guided profiler
46/96 x 1/4"Guided profiler
46/96X1/4TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
Specifications 
D 1/2 inch D 12.7 mm C 32 mm B 12.7 mm A 90 degrees Shank4Diameter 1/4 inch -
Guided profiler
46/92 x 1/4"Guided profiler
46/92X1/4TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
Specifications D 5/8 inch D 15.9 mm C 19.1 mm B 15.9 mm A 90 degrees Shank4Diameter 1/4 inch -
Guided profiler
46/94 x 1/2"Guided profiler
46/94X1/2TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
Specifications 
D 19.1 mm C 1 inch C 25.4 mm B 19.1 mm A 90 degrees Shank4Diameter 1/2 inch -
Profiler cutter
46/09 x 1/2"Profiler cutter
46/09X1/2TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
Specifications D 3/4 inch D 19.1 mm C 50 mm B 19.1 mm A 90 degrees Shank4Diameter 1/2 inch -
Profiler cutter
46/100 x 1/2"Profiler cutter
46/100X1/2TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
Specifications D 25 mm C 25 mm B 25 mm A 90 degrees Shank4Diameter 1/2 inch -
Profiler cutter
46/101 x 1/2"Profiler cutter
46/101X1/2TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
Specifications D 1 inch D 25.4 mm C 45 mm B 25.4 mm A 90 degrees Shank4Diameter 1/2 inch -
Profiler
46/90 x 1/4"Profiler
46/90X1/4TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
Specifications D 5/8 inch D 15.9 mm C 25 mm B 15.9 mm A 90 degrees Shank4Diameter 1/4 inch -
Profiler
46/910 x 1/4"Profiler
46/910X1/4TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
- Shorter cutter length for use on thin boards.
- Ideal for template making.
Specifications D 1/2 inch D 12.7 mm C 4 mm OL 60 mm B 12.7 mm Shank4Diameter 1/4 inch -
Guided 90 degree trimmer 12.7 mm diameter 38.1mm length
46/210 x 1/2"Guided 90 degree trimmer 12.7 mm diameter 38.1mm length
46/210X1/2TC
Self-guiding trimmers with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board.
- An approximate 3mm overlap should be left before copy profiling.
- When using plastic laminate adhesive to dry before trimming.
- This avoids clogging the guide bearing.
Specifications D 12.7 mm C 1 1/2 inches C 38.1 mm B 12.7 mm A 90 degrees Shank4Diameter 1/2 inch -
Guided 90 degree trimmer 12.7 mm diameter 25mm length
T46/01 x 1/2"Guided 90 degree trimmer 12.7 mm diameter 25mm length
T46/01X1/2TC
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.
- Self-guiding trimmer with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay.
- For copy profiling, use the bearing to follow a template or base edge of board.
- A 3mm approximate overlap should be left before copy profiling.
- When using plastic laminate always allow laminate adhesive to dry before trimming.
- This avoids clogging the guide bearing.
Specifications D 1/2 inch D 12.7 mm C 25 mm B 12.7 mm A 90 degrees Shank4Diameter 1/2 inch -
Guide trimmer 12.7 mm diameter 50mm length
46/23 x 1/2"Guide trimmer 12.7 mm diameter 50mm length
46/23X1/2TC
Self-guiding trimmers with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board.
- An approximate 3mm overlap should be left before copy profiling.
- When using plastic laminate adhesive to dry before trimming.
- This avoids clogging the guide bearing.
Specifications D 12.7 mm C 50 mm B 12.7 mm A 90 degrees Shank4Diameter 1/2 inch -
Template profile cutter
46/91 x 1/4"Template profile cutter
46/91X1/4TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
- Shorter cutter length for use on thin boards.
- Ideal for template making.
Specifications D 1/2 inch D 12.7 mm C 3/8 inch C 9.5 mm B 12.7 mm A 90 degrees Shank4Diameter 1/4 inch -
Double Overlap cutter
46/19 x 1/4"Double Overlap cutter
46/19X1/4TC
Roughing cutter which leaves an overhang of 3mm, for secondary final trimming.
- Life can be extended by varying height of cutter.
Specifications 
D 12.7 mm C 1 inch C 25.4 mm B 19 mm A 90 degrees Shank4Diameter 1/4 inch -
Profiler
46/95 x 1/4"Profiler
46/95X1/4TC
Profiler with shank mounted bearing guides.
- For use with router mounted above or below a table when following a template.
- For profiling and rebating applications only.
- Not for plunge cutting/grooving.
- A 3mm maximum overlap should be left before trimming.
Specifications D 1/2 inch D 12.7 mm C 1 inch C 25.4 mm B 12.7 mm A 90 degrees Shank4Diameter 1/4 inch
