Two Flutes

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
• Ideal for cutting kitchen worktops.

Specifications
D 1/2 inch D 12.7 mm C 50 mm OL 99 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Specifications
D 1/2 inch D 12.7 mm C 32 mm OL 64 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tips.

Specifications
D 33/64 inch D 13 mm C 26 mm OL 57 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tips.

Specifications
D 33/64 inch D 13 mm C 26 mm OL 72 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 35/64 inch D 14 mm C 25 mm OL 56 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 35/64 inch D 14 mm C 50 mm OL 95 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Specifications
D 5/64 inch D 2 mm C 5 mm OL 43 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 19/32 inch D 15 mm C 25 mm OL 57 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 19/32 inch D 15 mm C 25 mm OL 67 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 5/8 inch D 15.9 mm C 50 mm OL 96 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 5/8 inch D 15.9 mm C 32 mm OL 74 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 5/8 inch D 16 mm C 19 mm OL 52 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 5/8 inch D 16 mm C 19 mm OL 60 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 43/64 inch D 17 mm C 25 mm OL 54 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 43/64 inch D 17 mm C 25 mm OL 65 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 45/64 inch D 18 mm C 25 mm OL 67 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 45/64 inch D 18 mm C 50 mm OL 92 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 23/32 inch D 18.2 mm C 21 mm OL 53 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 23/32 inch D 18.2 mm C 32 mm OL 74 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 3/4 inch D 19.1 mm C 25 mm OL 58 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 3/4 inch D 19.1 mm C 25 mm OL 67 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 3/4 inch D 19.1 mm C 50 mm OL 92 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 19.1 mm C 63 mm OL 105 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 3/4 inch D 19.1 mm C 37 mm OL 79 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Specifications
D 2.5 mm C 8 mm OL 48 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 25/32 inch D 20 mm C 25 mm OL 66 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 25/32 inch D 20 mm C 25 mm OL 57 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 53/64 inch D 21 mm C 19 mm OL 50 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 53/64 inch D 21 mm C 19 mm OL 59 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 55/64 inch D 22 mm C 19 mm OL 50 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 55/64 inch D 22 mm C 19 mm OL 57 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 7/8 inch D 22.2 mm C 19 mm OL 51 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 29/32 inch D 23 mm C 19 mm OL 57 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 29/32 inch D 23 mm C 19 mm OL 50 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Specifications
D 25/64 inch D 10 mm C 25 mm OL 69 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 61/64 inch D 24 mm C 19 mm OL 59 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 61/64 inch D 24 mm C 19 mm OL 50 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 63/64 inch D 25 mm C 25 mm OL 56 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 63/64 inch D 25 mm C 25 mm OL 65 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 1 inch D 25.4 mm C 19 mm OL 51 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 1 inch D 25.4 mm C 19 mm OL 60 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 1 inch D 25.4 mm C 37 mm OL 79 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 1 1/32 inch D 26 mm C 25 mm OL 65 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 1 1/16 inch D 27 mm C 32 mm OL 72 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 1 7/64 inch D 28 mm C 25 mm OL 66 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Specifications
D 3 mm C 11 mm OL 51 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Specifications
D 1/8 inch D 3.2 mm C 11 mm OL 51 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Specifications
D 3.4 mm C 11 mm OL 51 mm Shank4Diameter 1/4 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 1 3/16 inch D 30 mm C 25 mm OL 67 mm Shank4Diameter 1/2 inch

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• TCT plunge centre tip.

Specifications
D 1 3/8 inch D 35 mm C 25 mm OL 67 mm Shank4Diameter 1/2 inch