Ovolo & Rounding Over
-
Bearing guided ovolo cutter 6.3mm radius
46/130 x 1/4"Bearing guided ovolo cutter 6.3mm radius
46/130X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications 
D 1 inch D 25.4 mm C 13 mm B 9.5 mm B2 12.7 mm R 6.3 mm Shank0Diameter 1/4 inch -
Deep Rounding over cutter
46/7/60 x 1/2"Deep Rounding over cutter
46/7/60X1/2TC
Simultaneously rounds over and profiles the edge.
- Ideal for pencil round architrave.
Specifications 
D 36 mm D2 16 mm C 29 mm B 16 mm R 10 mm ShankoDiameter 1/2 inch -
Bearing guided round over Queen Anne
46/9/50 x 1/4"Bearing guided round over Queen Anne
46/9/50X1/4TC
For window boards 25mm thick.
- Two passes create shallow nosing.
Specifications 
D 15/16 inch D 23.7 mm C 3/4 inch C 19.0 mm OL 50.1 mm B 12.7 mm R 42 mm ShankoDiameter 1/4 inch -
Bearing guided window board cutter
46/9/60 x 1/4"Bearing guided window board cutter
46/9/60X1/4TC
For window boards 25mm thick.
- Two passes create shallow nosing.
Specifications 
D 30 mm C 16 mm B 12.7 mm R 16 mm ShankoDiameter 1/4 inch -
Guided round over chamfer cutter 70 degrees
46/40 x 1/2"Guided round over chamfer cutter 70 degrees
46/40X1/2TC
Self guided for modern architrave & skirting.
Specifications 
D 33 mm C 17 mm B 12.7 mm B2 16 mm R 4.75 mm A 70 degrees Shank0Diameter 3/8 inch -
Bearing guided ovolo cutter 6.3mm radius
46/130 x 1/2"Bearing guided ovolo cutter 6.3mm radius
46/130X1/2TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 1 inch D 25.4 mm C 13 mm B 9.5o&o12.7 mm R 6.3 mm Shank0Diameter 1/2 inch -
Bearing guided ovolo cutter 6mm radius
46/125 x 1/4"Bearing guided ovolo cutter 6mm radius
46/125X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 24.7 mm C 12 mm OL 51 mm B 9.5 mm B2 12.7 mm R 6 mm Shank0Diameter 1/4 inch -
Bearing guided ovolo cutter 4.8mm radius
46/12 x 1/4"Bearing guided ovolo cutter 4.8mm radius
46/12X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 22 mm C 1/2 inch C 12.7 mm B 9.5 mm B2 12.7 mm R 4.8 mm Shank0Diameter 1/4 inch -
Bearing guided ovolo cutter 3mm radius
46/118 x 1/4"Bearing guided ovolo cutter 3mm radius
46/118X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 18.7 mm C 3/8 inch C 9.5 mm OL 49 mm B 9.5 mm B2 12.7 mm R 3 mm Shank0Diameter 1/4 inch -
Bearing guided ovolo cutter 3.2mm radius
46/11 x 1/4"Bearing guided ovolo cutter 3.2mm radius
46/11X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 19 mm C 3/8 inch C 9.5 mm B 9.5 mm B2 12.7 mm R 3.2 mm Shank0Diameter 1/4 inch -
Bearing guided ovolo cutter 7.9mm radius
46/93 x 1/4"Bearing guided ovolo cutter 7.9mm radius
46/93X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 28 mm C 1/2 inch C 12.7 mm B 9.5o&o12.7 mm R 7.9 mm Shank0Diameter 1/4 inch -
Bearing guided ovolo cutter 7.9mm radius
46/93 x 1/2"Bearing guided ovolo cutter 7.9mm radius
46/93X1/2TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 28 mm C 1/2 inch C 12.7 mm B 9.5o&o12.7 mm R 7.9 mm Shank0Diameter 1/2 inch -
Bearing guided ovolo cutter 12.7mm radius
46/150 x 1/2"Bearing guided ovolo cutter 12.7mm radius
46/150X1/2TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 38 mm C 19 mm B 9.5o&o12.7 mm R 12.7 mm Shank0Diameter 1/2 inch -
Bead ovolo set 6.4mm radius
46/32 x 1/4"Bead ovolo set 6.4mm radius
46/32X1/4TC
Self guided decorative bead ovolos supplied with two bearings.
- Larger bearing removes the quirk.
Specifications 
D 35.1 mm C 16 mm B 9.5 mm B2 12.7 mm R 6.4 mm R2 4.8 mm ShankoDiameter 1/4 inch -
Bearing guided ovolo cutter 12.7mm radius
46/150 x 1/4"Bearing guided ovolo cutter 12.7mm radius
46/150X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 38 mm C 19 mm B 9.5o&o12.7 mm R 12.7 mm Shank0Diameter 1/4 inch -
Bearing guided ovolo cutter 11.1mm radius
46/145 x 1/2"Bearing guided ovolo cutter 11.1mm radius
46/145X1/2TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 34.9 mm C 18 mm B 9.5o&o12.7 mm R 11.1 mm Shank0Diameter 1/2 inch -
Bearing guided ovolo cutter 9.5mm radius
46/140 x 1/2"Bearing guided ovolo cutter 9.5mm radius
46/140X1/2TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 32 mm C 16 mm B 9.5 mm B2 12.7 mm R 9.5 mm Shank0Diameter 1/2 inch -
Bearing guided ovolo cutter 14.2mm radius
46/155 x 1/2"Bearing guided ovolo cutter 14.2mm radius
46/155X1/2TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 41.1 mm C 20 mm B 9.5 mm B2 12.7 mm R 14.2 mm Shank0Diameter 1/2 inch -
Bearing guided ovolo cutter 16mm radius
46/160 x 1/2"Bearing guided ovolo cutter 16mm radius
46/160X1/2TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 44.5 mm C 22 mm B 9.5 mm B2 12.7 mm R 16 mm Shank0Diameter 1/2 inch -
Pin guided round over cutter
7E/5 x 1/4"Pin guided round over cutter
7E/5X1/4TC
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.
Specifications 
D 34.4 mm C 19 mm P 9 mm R 1/2 inch R 12.7 mm ShankoDiameter 1/4 inch -
Guided panel cutter
17/01 x 1/4"Guided panel cutter
17/01X1/4TC
Template thickness should be 5mm thicker than cut length of cutter.
Specifications 
D 1/2 inch D 12.7 mm C 3/8 inch C 9.5 mm B 12.7 mm R 3 mm ShankoDiameter 1/4 inch -
Pin guided round over cutter
7E/4 x 1/4"Pin guided round over cutter
7E/4X1/4TC
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.
Specifications D 29.0 mm C 15.8 mm P 9 mm R 3/8 inch R 9.5 mm ShankoDiameter 1/4 inch -
Pin guided round over cutter
7E/3 x 1/4"Pin guided round over cutter
7E/3X1/4TC
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.
Specifications D 26 mm C 14.3 mm R 5/16 inch R 8 mm P 9 mm ShankoDiameter 1/4 inch -
Pin guided round over cutter
7E/1 x 1/4"Pin guided round over cutter
7E/1X1/4TC
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.
Specifications D 19 mm C 11.8 mm R 3/16 inch R 4.8 mm P 9mm ShankoDiameter 1/4 inch -
Pin guided round over cutter
7E/2 x 1/4"Pin guided round over cutter
7E/2X1/4TC
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.
Specifications D 22 mm C 12.6 mm R 1/4 inch R 6.3 mm P 9mm ShankoDiameter 1/4 inch -
Bearing guided ovolo cutter 1.6mm radius
46/115 x 1/4"Bearing guided ovolo cutter 1.6mm radius
46/115X1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 5/8 inch D 15.9 mm C 5/16 inch C 7.9 mm B 9.5 mm B2 12.7 mm R 1.6 mm Shank0Diameter 1/4 inch -
Guided ovolo cutter 3mm radius
17/1 x 1/4"Guided ovolo cutter 3mm radius
17/1X1/4TC
Template thickness should be 5mm thicker than cut length of cutter.
Specifications D 3/4 inch D 19.1 mm C 3/8 inch C 9.5 mm B 19.1 mm R 3 mm ShankoDiameter 1/4 inch -
Bead ovolo set 4mm radius
46/33 x 1/4"Bead ovolo set 4mm radius
46/33X1/4TC
Self guided decorative bead ovolos supplied with two bearings.
- Larger bearing removes the quirk.
Specifications D 28.7 mm C 1/2 inch C 12.7 mm B 9.5 mm B2 12.7 mm R 4 mm ShankoDiameter 1/4 inch -
Bearing guided ovolo cutter 19mm radius
46/17 x 1/2"Bearing guided ovolo cutter 19mm radius
46/17X1/2TC
Self-guiding cutters for rounding over edges do not require a side fence.
- They are supplied with two bearings.
- Use the larger bearing for a round-over.
- If the cutter is lowered, a top quirk can be produced.
- A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specifications D 51 mm C 25 mm B 9.5 mm B 12.7 mm R 19.1 mm Shank0Diameter 1/2 inch -
Guided ovolo cutter 5mm radius
17/2 x 1/4"Guided ovolo cutter 5mm radius
17/2X1/4TC
Template thickness should be 5mm thicker than cut length of cutter.
Specifications D 22 mm C 12 mm B 22 mm R 5 mm ShankoDiameter 1/4 inch -
Hand rail cutter
46/43 x 1/2"Hand rail cutter
46/43X1/2TC
A quarter ellipse cutter for architraves and hand rails.
- Ref. 46/43 can be used to form the top portion of a handrail moulding when used in conjunction with Ref. 91/10.
Specifications 
D 82.7 mm C 19 mm B 12.7 mm R 51 mm ShankoDiameter 1/2 inch -
Guided plaque cutter
40/32 x 1/4"Guided plaque cutter
40/32X1/4TC
A guided radius with bevel cutter to accent the base of award plaques, name plaques, display stands etc.
Specifications 
D 27 mm C 12.7 mm OL 64 mm B 12.7 mm R 4.8 mm A 22.5 degrees ShankoDiameter 1/4 inch -
Guided flat ovolo cutter 12mm radius
46/41 x 1/4"Guided flat ovolo cutter 12mm radius
46/41X1/4TC
A bearing guided flat ovolo, giving an attractive edging effect.
Specifications 
D 30 mm C 10 mm B 9.5 mm R 12 mm ShankoDiameter 1/4 inch -
Guided thumb mould cutter
46/42 x 1/2"Guided thumb mould cutter
46/42X1/2TC
A quarter ellipse cutter for architraves and hand rails.
- Ref 46/42 can be used to form the top portion of handrail moulding when used in conjunction with Ref. 93/3.
Specifications 
D 69.2 mm C 16 mm B 9.5 mm B2 12.7 mm R 44 mm ShankoDiameter 1/2 inch
