Jointing Cutters

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint.

• The Finger Jointer fits into any portable or stationary router with a 1/2 inch collet.
• Performing the cut
• Timber must be machined square.
• The cutters should be assembled to match the spindle rotation, and be stacked at 90 degrees to one another to ease stress on the tool.

Specifications
D 40 mm B 28 mm E 6.0 mm Shank0Diameter 1/2 inch Timber0thickness Min. 11.0mm   Max. 36.0mm

This Comb Jointing Set can be fitted to all heavy duty routers mounted in a fixed head position.

• It comprises a set of five 4mm kerf, TCT groovers, mounted on an arbor and three ball bearings. These offer alternative cutting depths and provide a self-guiding facility.
• The Trend Comb Jointer is ideally suited for producing small boxes, instrument cases etc.
• Please note: Timber ends must be cut square.

Specifications
D 47.6 mm B 28 mm Shank0Diameter 1/2 inch Timber width Max. 40.0mm

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints.

Specifications
D 24.6 mm C 18.5 mm OL 58 mm B 12.7 mm Shank0Diameter 1/4 inch

A heavy duty reversible finger jointer, to increase the gluing area for edge to edge joints.

Specifications
D 47.5 mm D2 37 mm C 30 mm Shank0Diameter 1/2 inch Timber0thickness Min. 14.0mm   Max. 25.0mm

This cutter makes a lapped mitre joint.

Specifications
D 51.3 mm D2 10 mm C 23 mm A 45 degrees Shank0Diameter 1/2 inch Timber0thickness Min. 15mm   Max. 18mm

This cutter makes a lapped mitre joint.

Specifications
D 35 mm D2 15 mm C 25 mm A 45 degrees Shank0Diameter 1/2 inch Timber0thickness Min. 15mm   Max. 18mm

Machining of this joint is carried out by routing one piece with the inside face on the table.

• The matching corner inside face is machined upright against the fence.
• Make sure that the cutter is centred on the workpiece.
• The cutter can also be used for a glue joint, for joining lengths together.
• Ideal for speaker cabinets and drawer construction.
• Please note: These tools cannot be re-sharpened. Inverted use only.

Specifications
D 42 mm C 12.7mm C2 4 mm A 45 degrees Shank0Diameter 1/4 inch Timber0thickness Min. 15mm   Max. 25mm

Machining of this joint is carried out by routing one piece with the inside face on the table.

• The matching corner inside face is machined upright against the fence.
• Make sure that the cutter is centred on the workpiece.
• The cutter can also be used for a glue joint, for joining lengths together.
• Ideal for speaker cabinets and drawer construction.
• Please note: These tools cannot be re-sharpened. Inverted use only.

Specifications
D 68 mm C 30 mm C2 12.5 mm A 45 degrees Shank0Diameter 1/2 inch Timber0thickness Min. 15mm   Max. 25mm

To increase gluing area producing a strong joint in drawer production.

Specifications
D 25.4 mm C 12.7 mm Shank0Diameter 1/4 inch Timber0thickness Min. 15mm   Max. 25mm

Cutters to create a knuckle joints for gate leg tables.

• The cutter should be used in a router table.
• Hand tools will be required to finish the joint.

Specifications
D 23.8 mm C 17 mm B 9.5 mm R 7.14 mm A 45 degrees Shank0Diameter 1/4 inch

Cutters to create a knuckle joints for gate leg tables.

• The cutter should be used in a router table.
• Hand tools will be required to finish the joint.

Specifications
D 28.5 mm C 22.0 mm B 9.5 mm R 9.5 mm Shank0Diameter 1/4 inch