Chamfer & 'V' Groove
-
Triple flute engraver
S11/11 x 1/4"Triple flute engraver
S11/11X1/4STC
Cuts cleanly without feather edging.
- Solid Carbide for long life.
- Cuts to a fine' V' groove point.
- Ideal for sign writing.
Specifications 
D 14.5 mm C 12.5 mm C2 14 mm A 60 degrees Shank0Diameter 1/4 inch -
Panel mould cutter
11/20 x 1/4"Panel mould cutter
11/20X1/4TC
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
- Approx. 1.0mm flat will be found on nose.
Specifications 
D 1/2 inch D 12.7 mm C 16 mm B 12.7 mm A 60 degrees ShankoDiameter 1/4 inch -
Panel mould cutter
11/40 x 1/4"Panel mould cutter
11/40X1/4TC
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
- Approx. 1.0mm flat will be found on nose.
Specifications 
D 1/2 inch D 12.7 mm C 12.7 mm B 12.7 mm A 45 degrees Shank0Diameter 1/4 inch -
Chamfer V groove cutter 30 degrees
11/1 x 1/4"Chamfer V groove cutter 30 degrees
11/1X1/4TC
Use for bevelling, chamfering and for producing mortar grooves.
- Approx. 1.0mm flat will be found on nose.
Specifications 
D 21.5 mm C 5.5 mm C2 12 mm A 30 degrees Shank0Diameter 1/4 inch -
Chamfer V groove cutter 60 degrees
11/5 x 1/4"Chamfer V groove cutter 60 degrees
11/5X1/4TC
Use for bevelling, chamfering and for producing mortar grooves.
- Approx. 1.0mm flat will be found on nose.
Specifications D 1/2 inch D 12.7 mm C 10.3 mm C2 11.9 mm A 60 degrees Shank0Diameter 1/4 inch -
Chamfer V groove cutter 45 degrees
11/2 x 1/4"Chamfer V groove cutter 45 degrees
11/2X1/4TC
Use for bevelling and chamfering.
- A flat, approximately 1.0mm, will be found on V Groove tip.
Specifications D 9.5 mm C 5.0 mm C2 6.5 mm OL 45 mm A 45 degrees Shank0Diameter 1/4 inch -
Chamfer V groove cutter 45 degrees
11/3 x 1/4"Chamfer V groove cutter 45 degrees
11/3X1/4TC
Use for bevelling, chamfering and for producing mortar grooves.
- Approx. 1.0mm flat will be found on nose.
- Ideal for imitating 'V' jointed tongue and groove on man-made board.
Specifications D 3/4 inch D 19.1 mm C 9.2 mm C2 13 mm A 45 degrees Shank0Diameter 1/4 inch -
Chamfer V groove cutter 45 degrees
10/10 x 1/2"Chamfer V groove cutter 45 degrees
10/10X1/2TC
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Specifications D 32 mm C 15 mm C2 22 mm A 45 degrees Shank0Diameter 1/2 inch -
Chamfer V groove cutter 45 degrees
10/11 x 1/2"Chamfer V groove cutter 45 degrees
10/11X1/2TC
Use for bevelling, chamfering and for producing mortar grooves.
- Approx. 1.0mm flat will be found on nose.
Specifications D 38 mm C 19 mm C2 26.5 mm A 45 degrees Shank0Diameter 1/2 inch -
Pin guided chamfer bevel cutter 45 degrees
10H/1 x 1/4"Pin guided chamfer bevel cutter 45 degrees
10H/1X1/4TC
Ideal for fast chamfering.
- Popular in the sign making trades.
- For chamfering edges of plastic material .
Specifications 
C 10 mm C2 14 mm P 5.5mm A 45 degrees Shank0Diameter 1/4 inch -
Bearing guided chamfer cutter 25 degrees
46/34 x 1/2"Bearing guided chamfer cutter 25 degrees
46/34X1/2TC
Larger bearing removes the flat.
- Supplied with two bearings.
Specifications 
D 41 mm C 5 mm C2 13 mm B 12.7 mm B2 19 mm A 25 degrees Shank0Diameter 1/2 inch -
Guided bevel cutter
46/35 x 1/2"Guided bevel cutter
46/35X1/2TC
Larger bearing removes the flat.
- Supplied with two bearings.
Specifications D 41.5 mm C 8 mm C2 13.7 mm B 12.7 mm B2 19 mm A 35 degrees Shank0Diameter 1/2 inch -
Bearing guided chamfer cutter 45 degrees
46/37 x 1/4"Bearing guided chamfer cutter 45 degrees
46/37X1/4TC
Ideal for newel posts and caps for stairs.
- Supplied with one bearing.
Specifications 
D 31.8 mm C 12 mm C2 16 mm B 9.5 mm A 45 degrees Shank0Diameter 1/4 inch -
Bearing guided chamfer cutter 45 degrees
46/37 x 1/2"Bearing guided chamfer cutter 45 degrees
46/37X1/2TC
Ideal for newel posts and caps for stairs.
- Supplied with one bearing.
Specifications D 31.8 mm C 12 mm C2 16 mm B 9.5 mm A 45 degrees Shank0Diameter 1/2 inch -
Bearing guided chamfer cutter 45 degrees
46/360 x 1/4"Bearing guided chamfer cutter 45 degrees
46/360X1/4TC
Ideal for newel posts and caps for stairs.
- Supplied with one bearing.
Specifications D 35.1 mm C 12 mm C2 16 mm B 12.7 mm A 45 degrees Shank0Diameter 1/4 inch -
Bearing guided chamfer cutter 45 degrees
46/360 x 1/2"Bearing guided chamfer cutter 45 degrees
46/360X1/2TC
Ideal for newel posts and caps for stairs.
- Supplied with one bearing.
Specifications D 35.1 mm C 12 mm C2 16 mm B 12.7 mm A 45 degrees Shank0Diameter 1/2 inch -
Bearing guided chamfer cutter 45 degrees
46/38 x 1/2"Bearing guided chamfer cutter 45 degrees
46/38X1/2TC
Ideal for newel posts and caps for stairs.
- Supplied with one bearing.
Specifications D 51.5 mm C 19 mm C2 26 mm B 12.7 mm A 45 degrees Shank0Diameter 1/2 inch -
Bevel cutter
46/103 x 1/2"Bevel cutter
46/103X1/2TC
Useful for bevelling thick timbers.
- Certain sizes can be used for jointing, boxes, pilasters and carcassing.
- For full bevels, template should be fitted to component.
Specifications 
D 26 mm D2 12.7 mm C 35 mm C2 36 mm B 12.7 mm A 80 degrees Shank0Diameter 1/2 inch -
Bevel cutter
46/106 x 1/2"Bevel cutter
46/106X1/2TC
Useful for bevelling thick timbers.
- Certain sizes can be used for jointing, boxes, pilasters and carcassing.
- For full bevels, template should be fitted to component.
Specifications D 53 mm D2 12.7 mm C 35 mm C2 40 mm B 12.7 mm A 60 degrees Shank0Diameter 1/2 inch -
Bevel cutter
46/104 x 1/2"Bevel cutter
46/104X1/2TC
Useful for bevelling thick timbers.
- Certain sizes can be used for jointing, boxes, pilasters and carcassing.
- For full bevels, template should be fitted to component.
Specifications D 30 mm D2 12.7 mm C 35 mm C2 36 mm B 12.7 mm A 75 degrees Shank0Diameter 1/2 inch
