Raised Panel Moulding
-
Cove panel raiser cutter 14mm radius
18/21 x 8mmCove panel raiser cutter 14mm radius
18/21X8MMTC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/3.
Specifications 
D 45 mm D2 17 mm C 14 mm R 14 mm ShankoDiameter 8 mm -
Panel bevel cutter
18/20 x 8mmPanel bevel cutter
18/20X8MMTC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/4, PSC/40.
Specifications 
D 45 mm D2 11 mm C 17 mm A 10 degrees ShankoDiameter 8 mm -
Ovolo panel raiser cutter 3mm radius
18/22 x 1/2"Ovolo panel raiser cutter 3mm radius
18/22X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/4, PSC/40.
Specifications 
D 50 mm D2 40 mm C 14 mm R 3 mm ShankoDiameter 1/2 inch -
Vertical panel bevel cutter
18/90 x 1/2"Vertical panel bevel cutter
18/90X1/2TC
Shape similar to Ref. 18/80.
- Suitable panel mould for use with Ref. PSC/5 & PSC/50.
- 8mm shank tools are for use with medium and heavy duty routers
Specifications 
D 28.5 mm C 38 mm A 75 degrees ShankoDiameter 1/2 inch -
Bearing guided panel cutter
18/80 x 1/2"Bearing guided panel cutter
18/80X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/5. Available as set Ref. PDS/5.
Specifications 
D 86 mm C 1/2 inch C 12.7 mm B 12.7 mm A 15 degrees ShankoDiameter 1/2 inch -
Modern panel cutter - 8mm Shank
18/26 x 8mmModern panel cutter - 8mm Shank
18/26X8MMTC
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.
These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/1.
Specifications 
D 45 mm C 13.5 mm R 6.3 mm R2 3.2 mm A 3 degrees ShankoDiameter 8 mm -
Cove panel raiser cutter 14mm radius
18/21 x 1/2"Cove panel raiser cutter 14mm radius
18/21X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/3.
Specifications D 50 mm D2 22 mm C 14 mm R 14 mm ShankoDiameter 1/2 inch -
Bearing guided panel cutter
18/81 x 1/2"Bearing guided panel cutter
18/81X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/40. Available as a set PDS/4.
Specifications 
D 86 mm C 12.7 mm B 12.7 mm R 40 mm ShankoDiameter 1/2 inch -
Panel bevel cutter
18/19 x 1/2"Panel bevel cutter
18/19X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,
can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.
These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Angled panel raiser. Suitable panel mould for use with Ref. PSC/5.
Specifications 
D 67.7 mm D2 6 mm C 19 mm A 25 degrees ShankoDiameter 1/2 inch -
Bearing guided classic panel raiser
18/82 x 1/2"Bearing guided classic panel raiser
18/82X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/3. Available as a set PDS/3.
Specifications 
D 63.5 mm C 12.7 mm B 12.7 mm R 8 mm R2 3 mm A 5 degrees ShankoDiameter 1/2 inch -
Ogee panel raiser cutter
18/24 x 1/2"Ogee panel raiser cutter
18/24X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Refs. PSC/1, PSC/10, PSC/2 & PSC/20.
Specifications 
D 50 mm D2 16 mm C 14 mm R 12 mm ShankoDiameter 1/2 inch -
Panel bevel cutter
18/20 x 1/2"Panel bevel cutter
18/20X1/2TC
This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM.
-
Matches our range of profile scribers.
-
Suitable for use on natural timber and MDF.
-
When joining sections to produce solid wood panels,
alternate the growth ring direction of adjacent boards to prevent cupping.-
When moulding the panel, cut across the end grain first.
Any break out will then be removed when cutting with the grain.-
Suitable panel mould for use with Ref. PSC/5, PSC/50.
Specifications D 50 mm D2 16 mm C 17 mm A 10 degrees ShankoDiameter 1/2 inch -
-
Panel ogee cutter
18/23 x 1/2"Panel ogee cutter
18/23X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/2.
Specifications 
D 50 mm D2 26 mm C 14 mm R 6 mm ShankoDiameter 1/2 inch -
Bearing guided ogee panel cutter
18/83 x 1/2"Bearing guided ogee panel cutter
18/83X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/1 & PSC/2. Available in set Refs. PDS/1 & PDS/2.
Specifications 
D 67 mm C 16 mm B 12.7 mm R 17.5 mm ShankoDiameter 1/2 inch -
Guided ogee panel raiser
18/84 x 1/2"Guided ogee panel raiser
18/84X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable for use with Ref. PSC/2.
Specifications 
D 85.7 mm C 5/8 inch C 15.9 mm B 12.7 mm R 22.2 mm ShankoDiameter 1/2 inch -
Panel ogee cutter
18/25 x 1/2"Panel ogee cutter
18/25X1/2TC
Machining of traditional panels and frame doors, formerly done on spindle moulders,can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted.These Raised Panel cutters run best at lower speeds and match our range of profile scribers.
All are suitable for use on natural timber and MDF.
- 8mm hank tools are for use with medium and heavy duty routers only.
- Suitable panel mould for use with Ref. PSC/1, PSC/10.
Specifications 
D 50 mm D2 16 mm C 14 mm R 3 mm ShankoDiameter 1/2 inch -
Vertical panel radius cutter 40mm radius
18/91 x 1/2"Vertical panel radius cutter 40mm radius
18/91X1/2TC
Shape similar to Ref. 18/91.
- Suitable panel mould for use with Ref. PSC/4 & PSC/40.
- 8mm shank tools are for use with medium and heavy duty routers
Specifications 
D 28.5 mm C 38 mm R 40 mm ShankoDiameter 1/2 inch -
Vertical panel classic cutter
18/92 x 1/2"Vertical panel classic cutter
18/92X1/2TC
Shape similar to Ref. 18/82.
- Suitable panel mould for use with Ref. PSC/3 & PSC/30.
- 8mm shank tools are for use with medium and heavy duty routers
Specifications 
D 1 inch D 25.4 mm C 38 mm R 3 mm R2 8 mm A 85 degrees ShankoDiameter 1/2 inch -
Vertical panel ogee cutter
18/93 x 1/2"Vertical panel ogee cutter
18/93X1/2TC
Shape similar to Ref. 18/83.
- Suitable panel mould for use with Ref. PSC/1 , PSC/2, PSC/10 & PSC/20.
- 8mm shank tools are for use with medium and heavy duty routers
Specifications 
D 30 mm C 38 mm R 20 mm R2 18 mm ShankoDiameter 1/2 inch
