Panel Mould
-
Classic panel cutter
18/50 x 1/4"Classic panel cutter
18/50X1/4TC
To create profiles in the face or edge of drawer fronts and cabinet doors.
Specifications 
D 12 mm C 7 mm R 2 mm R2 4 mm ShankoDiameter 1/4 inch -
Classic panel cutter
18/51 x 1/4"Classic panel cutter
18/51X1/4TC
To create profiles in the face or edge of drawer fronts and cabinet doors.
Specifications D 19 mm C 1/2 inch C 12.7 mm R 4 mm R2 5 mm ShankoDiameter 1/4 inch -
Classic panel cutter
18/52 x 1/4"Classic panel cutter
18/52X1/4TC
To create profiles in the face or edge of drawer fronts and cabinet doors.
Specifications D 1 inch D 25.4 mm C 16 mm R 5 mm R2 7 mm ShankoDiameter 1/4 inch -
Panel mould cutter
18/42 x 1/2"Panel mould cutter
18/42X1/2TC
To create profiles in the face or edge of drawer fronts and cabinet doors.
Specifications D 1 inch D 25.4 mm C 17.5 mm R 5 mm R2 6.35 mm ShankoDiameter 1/2 inch -
Large roman ogee cutter
22/08 x 1/2"Large roman ogee cutter
22/08X1/2TC
Flat Roman Ogee, for raised panelling or edge moulding.
Used for decorative capping on hand rails.
Specifications 
D 41.5 mm C 8 mm C2 8 mm R 19 mm R2 11 mm ShankoDiameter 1/2 inch -
Flat Roman ogee cutter
22/1 x 1/2"Flat Roman ogee cutter
22/1X1/2TC
Flat Roman Ogee, for raised panelling or edge moulding.
Used for decorative capping on hand rails.
Specifications D 50 mm C 6.5 mm C2 11.5 mm R 20 mm R2 12 mm ShankoDiameter 1/2 inch -
Large ogee cutter
22/10 x 1/2"Large ogee cutter
22/10X1/2TC
Flat Roman Ogee, for raised panelling or edge moulding.
Used for decorative capping on hand rails.
Specifications D 50 mm C 10.5 mm C2 8.5 mm R 30 mm R2 15 mm ShankoDiameter 1/2 inch -
Astragal mould cutter
22/7 x 1/2"Astragal mould cutter
22/7X1/2TC
Flat Roman Ogee, for raised panelling or edge moulding.
Used for decorative capping on hand rails.
Specifications 
D 40 mm C 9 mm C2 11 mm R 22 mm R2 4 mm ShankoDiameter 1/2 inch -
Panel mould cutter
18/15 x 1/4"Panel mould cutter
18/15X1/4TC
Ideal panelling cutter for kitchen or cabinet doors.
Specifications 
D 32 mm C 11.5 mm R 26 mm ShankoDiameter 1/4 inch -
Dish panel raised cutter
18/18 x 1/2"Dish panel raised cutter
18/18X1/2TC
Ideal panelling cutter for kitchen or cabinet doors.
Specifications D 73 mm C 22 mm R 50 mm ShankoDiameter 1/2 inch -
Ovolo panel veining cutter 18mm radius
16/5 x 1/2"Ovolo panel veining cutter 18mm radius
16/5X1/2TC
Ideal for fluting spindles and other decorative turned work.
- They have a small flat ground on the nose that produces a very fine cut, suitable for routing false panel mouldings and engraving work.
Specifications 
D 44 mm C 5 mm C2 11 mm R 18 mm ShankoDiameter 1/2 inch -
Shallow ovolo cutter 25mm radius
16/6 x 1/2"Shallow ovolo cutter 25mm radius
16/6X1/2TC
Ideal for fluting spindles and other decorative turned work.
- They have a small flat ground on the nose that produces a very fine cut, suitable for routing false panel mouldings and engraving work.
Specifications D 41.5 mm C 11 mm C2 8 mm R 25 mm ShankoDiameter 1/2 inch -
Double ovolo veining cutter 6mm radius
16/8 x 1/2"Double ovolo veining cutter 6mm radius
16/8X1/2TC
Ideal for fluting spindles and other decorative turned work.
- They have a small flat ground on the nose that produces a very fine cut, suitable for routing false panel mouldings and engraving work.
Specifications 
D 41.5 mm C 8 mm C2 7 mm R 6 mm R2 15 mm ShankoDiameter 1/2 inch -
Panel mould cutter
18/30 x 1/2"Panel mould cutter
18/30X1/2TC
For bevelling and panelling applications.
Specifications 
D 29 mm D2 10 mm C 11 mm A 30 degrees ShankoDiameter 1/2 inch -
Panel mould cutter
11/20 x 1/4"Panel mould cutter
11/20X1/4TC
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
- Approx. 1.0mm flat will be found on nose.
Specifications 
D 1/2 inch D 12.7 mm C 16 mm B 12.7 mm A 60 degrees ShankoDiameter 1/4 inch -
Panel mould cutter
11/40 x 1/4"Panel mould cutter
11/40X1/4TC
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
- Approx. 1.0mm flat will be found on nose.
Specifications D 1/2 inch D 12.7 mm C 12.7 mm B 12.7 mm A 45 degrees ShankoDiameter 1/4 inch -
Panel mould cutter
11/41 x 1/2"Panel mould cutter
11/41X1/2TC
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
- Approx. 1.0mm flat will be found on nose.
Specifications D 3/4 inch D 19.1 mm C 16 mm B 19.1 mm A 45 degrees ShankoDiameter 1/2 inch
