Armeg 10mm x 400mm Cable Guide Drill BitThe One Tool Solution to cable guiding.
One of Armeg's latest innovations! No Rods - No Wires - No Tape - No Magnets. Why buy several tools when you can use just one.
Based around a 10mm x 400mm High quality SDS Drill bit.
Simply drill through the wall in the required place, bare a short length of wire at the end of the cable to be pulled.
Thread through the specially designed hole in the end of the drill bit or detach the SDS machine and thread through the hole in the shank end and pull the cable through.
Especially useful when there is rubble or insulation material present in the cavity as the drill bit is left in place whilst the cable is attached.
Features - Specially designed hole in each end of the bit.
Purpose - Routing of Cables, i.e. Electrical, TV, Satellite, Telephone, Alarm, Data, Speaker etc
Drill size - SDS 10mm x 400mm
For more information see Armeg website: http://www.armeg.com/Cable_Guide_Drill_Bit-A00071.asp
Tool Shank Grease - For Hammer Drills