Electrical Box Sinkers
-
EBS Single Set c/w Dust Collection Unit
EBS.HMSET.DC
Armeg Electrical Box Socket Sinking Single Set + Dust Collection Unit
The original Electric Box Sinking System for creating square holes for Electric switch and socket boxes.
Drill a square hole in less than two minutes using an SDS rotating machine.
Produces a flat backed hole to prevent movement and cracking plaster around the switch or socket.
Includes:
• 6.0 x 160 SDS pilot drill bit - (To be used on rotary & hammer).
• Round Cutter - (Crack & chisel Carbide tipped circular cutter produces a 80mm Dia hole using rotation & hammer & now comes complete with dust collection cover to reduce cleanup times).
• Square Cutter - (By locating the pilot & with the machine on hammer action only, quickly removes the four remaining corners).
• 80mm Wide Hard Material Chisel - (To be used instead of the square cutter in dense hard materials).
Machine recommendations - Min Approx weight of 2.3kgs, an impact blow energy of 2.4J and a loaded speed of around 900rpm .
All SDS shanks should be regularly greased. -
EBS Super Set c/w Dust Collection Unit
EBS.SSET.DC
Armeg Electrical Box Socket Sinking Super Set + Dust Collection Unit
The original Electric Box Sinking System for creating square holes for Electric switch & socket boxes.
Drill a square hole in less than two minutes using an SDS rotating machine.
Produces a flat backed hole to prevent movement & cracking plaster around the switch or socket.
Includes:
• 5 x 6.0mm x 160mm SDS pilot drill bit - (To be used on rotary and hammer).
• Round Cutter - (Crack & chisel Carbide tipped circular cutter produces a 80mm Dia hole using rotation & hammer & now comes complete with dust collection cover to reduce cleanup times).
• Square Cutter - (By locating the pilot & with the machine on hammer action only, quickly removes the four remaining corners).
• Double Hole spacing template
• Double Cutter - (For creating double width holes).
• 80mm Wide Hard Material Chisel - (To be used instead of the square cutter in dense hard materials).
• 30mm Channelling Chisel - (For creating quick conduit runs).
Machine recommendations - Min Approx weight of 2.3kgs, an impact blow energy of 2.4J and a loaded speed of around 900rpm .
All SDS shanks should be regularly greased. -
EBS Square Cutter c/w SDS+ Adaptor
EBS.SQUARE.SET
Armeg Electrical Box Socket Sinking Square Cutter + SDS Plus Adaptor
Drill a square hole in under two minutes!
Individual cutters to drill both stages of EBS single and double box sockets -
EBS Round Cutter c/w SDS+ Adaptor
EBS.ROUND.SET
Armeg Electrical Socket Box Sinkers Round Cutter + Pilot Adaptor to be used with Armeg Square Wall Cutter