Cutters for Corian
-
Waterfull Cutter
90/10X1/2TC
Creates the waterfall edge on worktops.
Specifications 
D 25 mm C 16 mm C2 22 mm B 19 mm R 6 mm Shank Diameter 1/2 inch -
Waterfall Cutter
90/11X1/2TC
Creates the waterfall edge on worktops.
Specifications D 25 mm C 24 mm C2 29 mm B 19 mm R 6 mm Shank Diameter 1/2 inch -
Six Wing Trimmer
52.3mm Diameter 6.5mm LengthSix Wing Trimmer
90/22X1/2TC
Especially designed for routing Corian which is used in many bathrooms and kitchens.
For trimming bowls, trepanning and face milling.
Specifications 
D 52.3 mm C 6.5 mm Shank Diameter 1/2 inch -
Upstand Cutter
91/16X1/2TC
Especially designed for routing Corian, which is used in many bathrooms and kitchens.
Specifications 
D 39 mm C 30 mm R 3 mm R2 6 mm Shank Diameter 1/2 inch -
Upstand Cutter
91/15X1/2TC
Especially designed for routing Corian, which is used in many bathrooms and kitchens.
Specifications D 39 mm C 45 mm R 3 mm R2 6 mm Shank Diameter 1/2 inch -
Bevel Cutter
10/22X1/2TC
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens.
Specifications 
D 24 mm C 25 mm A 75 degrees Shank Diameter 1/2 inch -
Bevel Cutter
11/60X1/2TC
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens.
Tool Ref. 11/60 is designed to trim surface to an undermount bowl.
Specifications 
D 32 mm C 25 mm B 21.8 mm A 78 degrees Shank Diameter 1/2 inch -
Bevel Cutter Guided Cutter
90/23X1/2TC
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens.
Tool Ref. 11/60 is designed to trim surface to an undermount bowl.
Specifications 
D 28.5 mm C 25 mm B 28.57 mm A 78 degrees Shank Diameter 1/2 inch -
Roman Ogee Bowl Cutter
Without lipRoman Ogee Bowl Cutter
7/96X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
- For finishing undermount bowl.
- Without lip.
Specifications 
D 54 mm C 25 mm B 21.8 mm A 75 degrees R 12.7 mm Shank Diameter 1/2 inch -
Roman Ogee Bowl Cutter
Without lipRoman Ogee Bowl Cutter
7/97X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
- For finishing undermount bowl.
- Without lip.
Specifications D 57 mm C 32 mm B 21.8 mm R 14 mm A 75 degrees Shank Diameter 1/2 inch -
Roman Ogee Bowl Cutter
With lipRoman Ogee Bowl Cutter
7/98X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
- For finishing undermount bowl.
- With lip.
Specifications 
D 57 mm C 19 mm C2 25.4 mm B 21.8 mm A 72 degrees R 12.7 mm Shank Diameter 1/2 inch -
Roman Ogee Bowl Cutter
With lipRoman Ogee Bowl Cutter
7/99X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
- For finishing undermount bowl.
- With lip.
Specifications D 60.7 mm C 25 mm C2 32 mm B 21.8 mm A 72 degrees R 14 mm Shank Diameter 1/2 inch -
Rounding Over Set
753X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
Two rounded corners can be cut simultaneously.
Specifications 
D 22 mm C 23 mm B 16 mm R 3 mm Shank Diameter 1/2 inch -
Bull nose Cutter
90/20X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
For bullnose moulding use Ref. 90/20 inconjunction with Ref. 90/25 and Ref. 90/21 with Ref. 90/28.
Specifications 
D 54 mm C 20 mm B 28.57 mm R 12.7 mm Shank Diameter 1/2 inch -
Bull Nose Cutter
90/21X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
For bullnose moulding use Ref. 90/20 inconjunction with Ref. 90/25 and Ref. 90/21 with Ref. 90/28.
Specifications D 67 mm C 25 mm B 28.57 mm R 19 mm Shank Diameter 1/2 inch -
Bull Nose Combination Cutter
90/25X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
- For bullnose moulding use Ref. 90/25 inconjunction with Ref. 90/20 and Ref. 90/28 with Ref. 90/21.
Specifications 
D 38 mm C 19 mm B 12.7 mm R 12.7 mm Shank Diameter 1/2 inch -
Bull Nose Combination Cutter
90/28X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
- For bullnose moulding use Ref. 90/25 inconjunction with Ref. 90/20 and Ref. 90/28 with Ref. 90/21.
Specifications D 50 mm C 25 mm B 12.7 mm R 19 mm Shank Diameter 1/2 inch -
Bull Nose Combination Cutter
90/26X1/4TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
- For bullnose moulding use Ref. 90/25 inconjunction with Ref. 90/20 and Ref. 90/28 with Ref. 90/21.
Specifications D 27 mm C 12.5 mm B 12.7 mm R 8 mm Shank Diameter 1/4 inch -
Bull Nose Combination Cutter
90/26X1/2TC
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
- For bullnose moulding use Ref. 90/25 inconjunction with Ref. 90/20 and Ref. 90/28 with Ref. 90/21.
Specifications D 27 mm C 12.5 mm B 12.7 mm R 8 mm Shank Diameter 1/2 inch -
Overlap Trimming Cutter
23mm diameterOverlap Trimming Cutter
90/29X1/2TC
Self guided tools for trimming inlay or overlaps.
Specifications 
D 22 mm D2 19.1 mm C 25 mm B 21 mm A 85 degrees Shank Diameter 1/2 inch -
Inlay Trim Cutter
90/30X1/2TC
Self guided tools for trimming inlay or overlaps.
Specifications 
D 19 mm C 25 mm B 19 mm A 90 degrees Shank Diameter 1/2 inch -
Trimming Cutter
28.6mm DiameterTrimming Cutter
90/31X1/2TC
Self guided tools for trimming inlay or overlaps.
Specifications 
D 28.6 mm C 1 1/2 inch C 38.1 mm B 28.57 mm A 90 degrees Shank Diameter 1/2 inch -
Tongue & Groove Cutter
91/20X1/2TC
For use with 6.0 mm material.
- Supplied with 2 x 4mm, 1 x 2mm groover and 1 x 41 mm & 1 x 43 mm diameter bearings.
Specifications 
D 47.7 mm C 2 mm C2 4 mm B 41 mm B2 43 mm Shank Diameter 1/2 inch -
Bevel Cutter Hob Cutter
90/40X1/2TC
Creates the aperture cutout for the fitting of hob units.
Specifications 
D 35 mm C 13.5 mm B 16 mm A 45 degrees Shank Diameter 1/2 inch -
Wavy Cutter
91/1X1/2TC
For edge to edge jointing giving a longer glue line. Increase the glue line by 27%.
Specifications 
D 16 mm C 45.5 mm Shank Diameter 1/2 inch
