T11 110V
Electronic full wave variable control of spindle speed under load for a fine finish on all types of material. Soft start eliminates sudden movement of machine on start up.
Two column precision base with large phosphor bronze bushes for plunging accuracy. Spindle lock and hex collet nut results in easy cutter changes with the 22mm spanner supplied.
Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.
3-position revolving depth stop for fast adjustable settings.
Adjustable inner plate for guide bush accuracy.
Router fine height adjuster for above and below height adjustment.
One revolution of the handle equals 1.5mm.
Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit.
Fittings for optional Clamp Guide System Kit.
Extra large base aperture for large cutters.
Quick release dust spout.
Ideal for site use.
All 110v routers over 1850W require a 32A BS4343 115v plug.
Minimum generator or transformer requirement 3 kVA continuous with a 32A BS4343 110v socket outlet.
110v units cannot be used on the no-volt release switch CRT/L and PRT/L router tables.
Includes:
1 x 1/2" Collet
1 x Fine Height Adjuster
1 x 30mm Guide Bush
1 x Inner Plate
1 x Line up Pin
1 x 35mm Clip-in Dust Spout
1 x Line up pin
1 x Side-fence with Micro Adjuster
1 x Storage Case
