Routing Accessories
-
Door Clamp
Ratchet TypeDoor Clamp
D/CLAMP/A
Holds door while drilling and fitting locks.
- No set-up time needed.
- No more searching and alternative door stops.
- Padded to prevent door and floor damage.
- For doors up to 55mm thick.
-
Universal Sub-base
c/w pins & bushUniversal Sub-base
UNIBASE
The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes, Will fit directly to most routers.
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.
- Instructions for fitting
- The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.
Includes:
- 2 x Line-up pins
- 1 x Guide bush
- 1 x Fixing screw pack
Specifications Diameter 170 mm Thickness 8 mm -
Door Holder Stand
D/STAND/A
Holds door on its edge while routing hinge recess & mortise for locks.
- Holds door securely.
- Non-scratch base.
- Adjustable clamp for doors 32mm to 55mm thick.
- Allows door to be tilted back to assist fitting into frame.
- Maximum door weight 50kg.
-
Corner Chisel
For squaring corners on hinge recessesCorner Chisel
C/CHISEL
- Allows a rounded recess in wood to be cut to a square recess with the use of a hammer.
- Ideal for squaring hinge recesses in door frames and door edges.
- Can be used the the Trend Hinge Jig.
- High Speed Steel (HSS) Anvil.
- Can be re-sharpened.
Specifications Length 70 mm Width 29 mm -
Worktop Jig Offset Scriber
M/KWS01
Gives offset between worktop jig and guide bush for ease of setting up.
- Allows true cutter path to be drawn.
- Scribes directly onto worktop.
- For 30mm guide bush and 1/2 inch router cutter.
-
F Clamp 200mm x 100mm
FC/200
A concise range of F-Style quick action gripper clamps for a variety of clamping applications.
- Zinc plated steel bar with cast steel head and jaw.
- Soft grip handle for better grip and more clamping force.
- Removable pad to provide grip on work surfaces and reduce workpiece marking.
- Ball joint swivel clamping jaw.
- Groove in the serrated bar to allow easier sliding of moving jaw.
Specifications 
Max Throat Depth (D) 100 mm Max Opening (O) 200 mm Steel Section (S) 27 mm x 7.5 mm -
Carry Case
Hard wearing carry caseCarry Case
CASE/1001
Hard wearing carry cases to protect and allow for ease of carrying of the Trend COMBI1001, COMBI1002 & KWJ900.
