Boring Tools

This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter.

Recommended for wood and man-made boards.

By reversing the countersink on the drill, it can be used as a non-cutting depth stop.

Ensures flutes of drill are aligned with flutes of countersink.

Do not overtighten screw.

Not suitable for production applications and not suitable for ferrous and non-ferrous metals.

Specifications
C 12 mm OL 32 mm A 45 degrees

A Tapered plug ensures an exceptionally tight fit is achieved.

Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required.

For use in drilling machines at a recommended speed of 3000 RPM (max. 6000 RPM). Material must be well clamped.

Specifications
D 1/2 inch D 12.7 mm C 15 mm Shank Diameter 1/2 inch

A Tapered plug ensures an exceptionally tight fit is achieved.

Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required.

For use in drilling machines at a recommended speed of 3000 RPM (max. 6000 RPM). Material must be well clamped.

Specifications
D 5/8 inch D 15.9 mm C 15 mm Shank Diameter 1/2 inch

A Tapered plug ensures an exceptionally tight fit is achieved.

Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required.

For use in drilling machines at a recommended speed of 3000 RPM (max. 6000 RPM). Material must be well clamped.

Specifications
D 3/4 inch D 19.1 mm C 15 mm Shank Diameter 1/2 inch

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges.

This type with scribers is used on veneered and wood finishes.

Use with pillar drills only.

Specifications
D 25 mm OL 65 mm Shank Diameter 3/8 inch

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges.

This type with scribers is used on veneered and wood finishes.

Use with pillar drills only.

Specifications
D 35 mm OL 65 mm Shank Diameter 1/4 inch

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges.

This type with scribers is used on veneered and wood finishes.

Use with pillar drills only.

Specifications
D 35 mm OL 65 mm Shank Diameter 3/8 inch

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges.

This type without scribers are for laminate covered boards.

Specifications
D 35 mm OL 65 mm Shank Diameter 1/4 inch

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges.

This type without scribers are for laminate covered boards.

Specifications
D 35 mm OL 65 mm Shank Diameter 3/8 inch

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges.

This hinge sinker is bested suited for thinner laminate covered boards.

Use with pillar drills only.

Specifications
D 35 mm OL 45 mm Shank Diameter 1/4 inch

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges.

This hinge sinker is bested suited for thinner laminate covered boards.

Use with pillar drills only.

Specifications
D 35 mm OL 45 mm Shank Diameter 3/8 inch

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges.

This economy range is supplied without scribers and are used for recessing holes in melamine covered chipboard.

Use with pillar drills only.

Specifications
D 35 mm OL 57 mm Shank Diameter 8 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 10 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 11 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 12 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 13 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 14 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 15 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 16 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 17 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 18 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 19 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 20 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 21 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 22 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 23 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 24 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 25 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 26 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 27 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 28 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 29 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 30 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 31 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 32 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 34 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 35 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 36 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 38 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 40 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 45 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 50 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 55 mm OL 90 mm Shank Diameter 10 mm

These machine bits have two wings, two scribers and a centre point.

Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.

The scribe gives a very clean entrance hole.

Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP.

For such materials, choose from Group 421 tools which have no scribers.

For use in drilling machines only.

Specifications
D 60 mm OL 90 mm Shank Diameter 10 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 1/2 inch D 12.7 mm OL 4 3/4 inches Shank Diameter 1/2 inch Shank Diameter 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 5/8 inch D 15.9 mm OL 4 3/4 inches Shank Diameter 1/2 inch Shank Diameter 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 3/4 inch D 19.1 mm OL 4 3/4 inches Shank Diameter 1/2 inch Shank Diameter 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 7/8 inch D 22.2 mm OL 5 inches Shank Diameter 1/2 inch Shank Diameter 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 1 inch D 25.4 mm OL 5 1/4 inches Shank Dia 1/2 inch Shank Dia 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 1 1/8 inch D 28.5 mm OL 5 1/4 inches Shank Dia 1/2 inch Shank Dia 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 1 1/4 inch D 31.7 mm OL 5 1/4 inches Shank Dia 1/2 inch Shank Dia 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 1 3/8 inch D 35 mm OL 5 1/4 inches Shank Dia 1/2 inch Shank Dia 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 1 1/2 inch D 38.1 mm OL 5 3/4 inches Shank Dia 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 1 5/8 inch D 41.3 mm OL 5 3/4 inches Shank Dia 1/2 inch Shank Dia 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 1 3/4 inch D 44.5 mm OL 6 inches Shank Dia 1/2 inch Shank Dia 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 1 7/8 inch D 47.6 mm OL 6 inches Shank Dia 1/2 inch Shank Dia 12.7 mm Shank Length 50.8 mm

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

• They cut fast, with the grain or across it.
• They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
• Not for use with routers.

Specifications
D 2 inches D 50.8 mm OL 6 inches Shank Dia 1/2 inch Shank Dia 12.7 mm

The effective tool for electricians, plumbers, carpenter and locksmiths.