You are viewing this site in staging mode. Click in this bar to return to normal site.

Grab Adhesives

  • CT1 Powergrab Adhesive

    CT1 Powergrab Adhesive
    Power Grab n Bond is a revolutionary product in the field of heavy duty versatile bonding

    CT1 Powergrab Adhesive
    CT1PG
    • Power Grab n Bond is a revolutionary product in the field of heavy duty versatile bonding.
    • It’s formulation is based on our unique hybrid polymer product CT1.
    • The density of Power Grab n Bond is far greater allowing phenomenal results in initial grab.
    • Coupled with the rapid curing will in the majority of applications reduce labour time by at least 50%.


    Size: 290ml Cartridge


    With Power Grab n Bond there is absolutely no need for any additional fixings as it was initially developed for facade bonding.

    In addition Power Grab n Bond has a capacity to adhere to endless materials such as stone, granite, ytong, marble, concrete, all metals (including alloys), polystyrene and most plastics.

    Power Grab n Bond’s ability to bond combined materials such as wood to concrete or stainless steel to stone is incredible.

     

    As already outlined Power Grab n Bond was initially developed for façade applications, conventional methods relied on two component epoxy mix to adhere the marble or granite slab to the block wall.
    Depending on the weight of the slab each one would then have to be supported by drilling in ties to support each one.
    As with all epoxies they can be temperamental if the correct mix is not achieved.
    Also full cure can be between 24 and 72 hours.
    Power Grab and Bond has none of these disadvantages.
    £9.95
    (ex. VAT)
  • Gripfill

    Gripfill
    High performance, general purpose, gap-filling adhesive

    Gripfill
    GF

    A high strength adhesive that will bond a wide variety of materials either to themselves or to each other.

    Gripfill will also act as a gap-filling adhesive on uneven surfaces.

    Coverage:

    This will vary according to material and smoothness of surface.
    As a guide one cartridge will give approximately 10.25 metres of bead at 6mm diameter.

     

    Cartridge size: 350ml

    £1.99
    (ex. VAT)
  • Gripfill Solvent Free

    Gripfill Solvent Free
    A white, solvent free gap filling adhesive that creates a high strength bond between two materials

    Gripfill Solvent Free
    GFNS

    A white, solvent free gap filling adhesive that creates a high strength bond between two materials.

    Gripfill Solvent Free provides an instant grab, immediately securing materials in place for accurate bonding.

    Gap filling properties mean uneven surfaces can be bonded without difficulty.

    Gripfill Solvent Free has been developed specifically for interior use and is ideal for decorating, refurbishment, building and DIY applications.

     

    Coverage:

    Approximately 13 metrres of 6mm bead.

    Cartridge size: 350ml

    £1.99
    (ex. VAT)

back to top ^