One turn of the revolving depth control turret adjusts the tool to all conventional flat dowel sizes.
The tilt stop can be fixed with detents of 0°, 22.5°, 45°, and 67.5° up to 90°.
Torsion-free cast angle stop and height adjustment make your work easier while 2 sturdy adjusting bolts keep your setting constant even after your 100th cut.
All you need is "on board" in the MAFELL-MAX: practical containers for your dowels, space for the optional pitch pocket cutter, anti-slip mat and of course your LNF 20.
Advantage for usage
- The on/off switch is easily and conveniently operated with your thumb - for right-handed and left-handed users.
- With above average 750 watt (1 hp) rating - for professional continuous use.
- Double column guide for height adjustment - ensures exact, torsion-free adjustment.
Supplied with:
1 Disk cutter, TCT, 100 x 4 x 22 mm (3 15/16 x 3/16 x 7/8 in.), 6 teeth
1 Ejection pipe
1 Hose connector
1 Dust bag
1 Screwdriver for recessed-head screws
1 Face pin spanner
1 Mains cable 4m (13.1 ft)
Craft Biscuit Jointing Blade100mm