Plumbing Tools

A set of 10 blue polypropylene rods with:-

2 - 12in Leather Straps.
1 - 4in Plunger.
1 - 2in Double Worm Screw.
Lockfast Type Fitting.

Size. 3ft x 3/4in.

Set of 10 blue polypropylene rods with:-

2 - 12in Leather Straps.
1 - 4in Plunger.
1 - 2in Double Worm Screw.
Lockfast Type Fitting.
1 - Clearing Wheel.
1 - 4in Drop Scraper.

Size: 3ft x 3/4in.

A set of 10 blue polypropylene drain rods with:

2 - 12in leather straps.
1 - 4in plunger.
1 - 2in Double worm screw.

Universal type screw fitting.
Rod Size. 3ft x 3/4in.

Drain Rod Set including 3 popular tools in a durable and waterproof Bailey carry bag.

Contents:
10 x 3ft x 3/4in Rods.
1 x 4in Plunger.
1 x 4in Drop Scraper.
1 x Double Worm Screw.

Supplied with small and medium jaws.

1/2IN & 3/4IN - 15 & 22mm

A Plumbers compression fitting spanner for tightening and loosening most 15 and 22mm compression fitting nuts.

Double ended.

Sizes: 15mm & 22mm.

Single ended compression nut spanner

• To suit most 28mm compression nuts
• Drop forged
• Easy to use
• Hardened jaw

The Monument MON2039 is a one piece all metal construction compression nut spanner, that is single ended and made from drop forged steel for added strength and durability, This MON2039 will suit most 28mm compression nuts and has an overall length of 290mm

Compression nut spanner single ended drop forged 39 mm A/F to suit most 28mm compression nuts.

Disposable de-burring tool.

The swivelling blade rotates freely to allow all sorts of de-burring operations to be carried out inside tubes, on sheet materials, inside holes etc.

Suitable for use on steel, copper, brass, plastics, wood and castings.

Made from tough plastics.

Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.

Extruded cover slides off and may be clipped over the base for standing the tool vertically during use.

Hanging tab permits vertical hanging from suitable protrusions.

Marked in millibars.

Millibar scale adjusts for zeroing water level.

Made from tough plastics.

Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.

Extruded cover slides off and may be clipped over the base for standing the tool vertically during use.

Hanging tab permits vertical hanging from suitable protrusions.

Marked in millibars.

Millibar scale adjusts for zeroing water level.

Made from tough plastics.

Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.

Extruded cover slides off and may be clipped over the base for standing the tool vertically during use.

Hanging tab permits vertical hanging from suitable protrusions.

Marked in millibars.

Millibar scale adjusts for zeroing water level.

Fitted with hose for testing LPG (Low pressure gas)

This Heat Pad resists temperatures up to 600 degrees Centigrade and does not present any of the hazards associated with asbestos materials.

Made from Glass Fabric.

Size: 12 x 10in (300 X 250mm)

A 15mm & 22mm copper pipe bender.

This machine is also capable of bending 15mm stainless steel pipe.

Tubular steel handles & a cast head, it comes supplied with: 15mm & 22mm guides.

A precision extruded aluminium guide.

Suitable for use with the GLM Bender and available to suit 15mm to 22mm pipes.

For use with the Hilmor GL Minor pipe bender. (for copper and stainless steel pipe)

Size. 15 mm O.D.

A precision extruded aluminium guide.

Suitable for use with the GLM Bender and available to suit 15mm to 22mm pipes.

This precision extruded aluminium guide for use with the Hilmor GL Minor pipe bender. (For copper pipe only)

Size. 22 mm O.D.

Square section spring steel for internal bending of copper pipes.
Polished finish.

Size. 22mm.

Square section spring steel for internal bending of copper pipes.
Polished finish.

Size. 15mm.

Mini bender for 180° bends on 6mm , 8mm & 10mm outside diameter copper pipe.

Internal and external copper pipe end deburrer.

Deburrs up to 36mm copper pipe.

Designed to remove an Olive from copper pipe

• Does not damage the pipe
• Not for stainless steel olives
• Easy to use
• Robust construction

The Monument olive removing tool is designed to remove an olive from copper pipe without damage to the pipe and without producing swarf.

The Monument olive removing tool is so easy to use just grip the olive with the tool and turn side to side then just slip it off the copper pipe, Job done also this will save time and money getting the job done right the first time.

NOTE: DO NOT attempt to remove stainless steel olives with this tool.

Removes 10mm Olives.

Designed to remove an Olive from copper pipe

• Does not damage the pipe
• Not for stainless steel olives
• Easy to use
• Robust construction

The Monument olive removing tool is designed to remove an olive from copper pipe without damage to the pipe and without producing swarf.

The Monument olive removing tool is so easy to use just grip the olive with the tool and turn side to side then just slip it off the copper pipe, Job done also this will save time and money getting the job done right the first time.

NOTE: DO NOT attempt to remove stainless steel olives with this tool.

Removes 15mm Olives.

Designed to remove an Olive from copper pipe

• Does not damage the pipe
• Not for stainless steel olives
• Easy to use
• Robust construction

The Monument olive removing tool is designed to remove an olive from copper pipe without damage to the pipe and without producing swarf.

The Monument olive removing tool is so easy to use just grip the olive with the tool and turn side to side then just slip it off the copper pipe, Job done also this will save time and money getting the job done right the first time.

NOTE: DO NOT attempt to remove stainless steel olives with this tool.

Removes 22mm Olives.

NO.0. - Capacity 4 to 22mm ( For copper tube)

Monument 2645T

• Robust metal conctrection
• Ratchet action
• Effective on PVC, polybutylene, MDP, polyethyleneelectrical sleeving
• Easy to use
• Plastic coated handle sleeves

The Monument 2645 is a very effective pipe cutter for cutting PVC, polythene, MDP, HEP20 and plastic overflow.

Simply place the Monument 2645 over the pipe to be cut and gently twist while you depress the handles to get a good clean cut. The MON2645 will cut pipe and rubber hoses etc. as this tool has a patented blade shape for ease of cut and a ratchet action for ease of use.

Maximum Pipe Size to cut 42mm.

These Monument socket forming tools come in 3 popular pipe sizes: 15mm, 22mm and 28mm.

All are ideal for joining two pieces of copper pipe of equal diameter together without using fittings.

The loose former allows easier withdrawal of tool after use, then the resulting capillary joint that is left can be soft or hard soldered to finish the joint.

These Monument socket forming tools come in 3 popular pipe sizes: 15mm, 22mm and 28mm.

All are ideal for joining two pieces of copper pipe of equal diameter together without using fittings.

The loose former allows easier withdrawal of tool after use, then the resulting capillary joint that is left can be soft or hard soldered to finish the joint.

These Monument socket forming tools come in 3 popular pipe sizes: 15mm, 22mm and 28mm.

All are ideal for joining two pieces of copper pipe of equal diameter together without using fittings.

The loose former allows easier withdrawal of tool after use, then the resulting capillary joint that is left can be soft or hard soldered to finish the joint.

Re cuts the seats of worn taps or stopcocks without disconnection from the pipework.
Tapered cones screw into the top of tap body, provided tap body is threaded to the top.

For taps with recessed threads in body, use parallel bush series.
Cutters are case hardened, feedscrew allows fine adjustment to the cutter.
All parts are interchangeable.

Fits 1/2in and 3/4in BS5412 bevelled seats.

Complete with:

• 17, 20 mm (11/16", 13/16") Bevelled Cutters.
• x1 double bush.

Re cuts the seats of worn taps or stopcocks without disconnection from the pipework.
Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top.

For taps with recessed threads in the body, use the parallel bush series.
Cutters are case hardened and the feedscrew allows fine adjustment to the cutter, with all parts are interchangeable.

Fits 1/2in and 3/4in BS1010 New series and BS5412 Flat and Bevelled seats.

Complete with:

• 17, 19, 20, 25mm (11/16", 3/4", 13/16", 1") Flat Cutters
• 17, 20mm (11/16", 13/16") Bevelled Cutters.
• x2 Double Bushes.

Re-cuts the seats of leaking tapes.

Fits BS5412 & BS1010 1/2in and 3/4in taps.

Complete with :-

• 17, 19 25 mm (11/16in 3/4in 1in) Flat Cutters
• x 2 double ended plastic bushes.