Routabout Jigs
-
Routabout Jig 22mm x 1/4" Shank
RBT/3
Access to pipes & cables beneath chipboard floors in seconds.
- For builders, plumbers & electricians.
- A 250mm diameter opening can be cut and made good in seconds.
- Designed for use in new or existing 18mm chipboard or similar floors.
- Cuts only the thickness of the board.
- No waste, the piece cut out is used to make good the floor.
- All you need is a plunge router (750 watts or above).
- A Unibase may be required for certain makes and models of router.
- Patent No. GB2238751.
Includes:
- 1 x Routabout template
- 3 x Spacer rings
- 1 x Special TCT router cutter
- 1 x 30mm Plastic guide bush
-
Routabout Jig 22mm x 1/2" Shank
RBT/4
Access to pipes & cables beneath chipboard floors in seconds.
- For builders, plumbers & electricians.
- A 250mm diameter opening can be cut and made good in seconds.
- Designed for use in new or existing 18mm chipboard or similar floors.
- Cuts only the thickness of the board.
- No waste, the piece cut out is used to make good the floor.
- All you need is a plunge router (750 watts or above).
- A Unibase may be required for certain makes and models of router.
- Patent No. GB2238751.
Includes:
- 1 x Routabout template
- 3 x Spacer rings
- 1 x Special TCT router cutter
- 1 x 30mm Plastic guide bush
-
Routabout Jig 18mm x 1/4" Shank
RBT/1
Access to pipes & cables beneath chipboard floors in seconds.
- For builders, plumbers & electricians.
- A 250mm diameter opening can be cut and made good in seconds.
- Designed for use in new or existing 18mm chipboard or similar floors.
- Cuts only the thickness of the board.
- No waste, the piece cut out is used to make good the floor.
- All you need is a plunge router (750 watts or above).
- A Unibase may be required for certain makes and models of router.
- Patent No. GB2238751.
Includes:
- 1 x Routabout template
- 3 x Spacer rings
- 1 x Special TCT router cutter
- 1 x 30mm Plastic guide bush
-
Routabout Jig 18mm x 1/2" Shank
RBT/2
Access to pipes & cables beneath chipboard floors in seconds.
- For builders, plumbers & electricians.
- A 250mm diameter opening can be cut and made good in seconds.
- Designed for use in new or existing 18mm chipboard or similar floors.
- Cuts only the thickness of the board.
- No waste, the piece cut out is used to make good the floor.
- All you need is a plunge router (750 watts or above).
- A Unibase may be required for certain makes and models of router.
- Patent No. GB2238751.
Includes:
- 1 x Routabout template
- 3 x Spacer rings
- 1 x Special TCT router cutter
- 1 x 30mm Plastic guide bush
